Netgear DGN2000 Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Netgear DGN2000. NETGEAR DGN2000 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir

Indice de contenidos

Pagina 1 - Router DGN2000 Setup

April 2008208-10255-01 v1.0NETGEAR, Inc.4500 Great America Parkway Santa Clara, CA 95054 USAWireless-N ADSL2+ Modem Router DGN2000 Setup Manual

Pagina 2 - Statement of Conditions

6 Getting to Know Your Wireless RouterRouter LabelThe label on the bottom of the wireless-N modem router shows the router’s MAC address, serial number

Pagina 3 - Contents

Getting to Know Your Wireless Router 7• Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large expanses of other mate

Pagina 4

8 Getting to Know Your Wireless RouterIf you choose to use the manual setup option, for best results, install and set up your router in this order:1.

Pagina 5 - Unpacking Your New Router

9Installing Your Router Using theSmart WizardTo use the Smart Wizard, you must be using a PC with Windows Vista, or Windows 2000, or Windows XP with S

Pagina 6 - Hardware Features

10 Installing Your Router Using the Smart Wizardyou can always access the router’s user interface later to select a security option (see “Accessing Yo

Pagina 7

Installing Your Router Manually (Advanced, Mac, and Linux Users) 11Installing Your Router Manually(Advanced, Mac, and Linux Users)Before installing an

Pagina 8 - Router Back Panel

12 Installing Your Router Manually (Advanced, Mac, and Linux Users)Understanding ADSL MicrofiltersADSL technology uses the same wires as your telephon

Pagina 9 - Router Side Panel

Installing Your Router Manually (Advanced, Mac, and Linux Users) 13Connecting Your Wireless-N Modem Router Before you install your wireless-N modem ro

Pagina 10 - Router Label

14 Installing Your Router Manually (Advanced, Mac, and Linux Users)• Two-Line Filter Example. Insert the two-line filter into the phone outlet and con

Pagina 11

Installing Your Router Manually (Advanced, Mac, and Linux Users) 15.3. Connect the Ethernet cable (D) from a wireless-N modem router LAN port to the E

Pagina 12

ii©2008 by NETGEAR, Inc. All rights reserved.TrademarksNETGEAR and the NETGEAR logo are trademarks of NETGEAR, Inc. Microsoft, Windows, and Windows NT

Pagina 13 - Smart Wizard

16 Installing Your Router Manually (Advanced, Mac, and Linux Users)5. Connect any additional wired PCs to your router by inserting an Ethernet cable f

Pagina 14

Installing Your Router Manually (Advanced, Mac, and Linux Users) 17Setting Up Your Router for Internet AccessWhen configuring your wireless router man

Pagina 15

18 Installing Your Router Manually (Advanced, Mac, and Linux Users)2. When prompted, enter admin for the router User Name and password for the router

Pagina 16 - ADSL Microfilter

Installing Your Router Manually (Advanced, Mac, and Linux Users) 19If you do not connect successfully: • Review your settings and make sure that you h

Pagina 17

20 Installing Your Router Manually (Advanced, Mac, and Linux Users)

Pagina 18 - Figure 8

Configuring Your Wireless Network 21Configuring Your Wireless NetworkAfter installing your router, you must log into the router to complete your wirel

Pagina 19 - Figure 9

22 Configuring Your Wireless NetworkSetting Your SSID and Wireless Security ManuallyTo specify the wireless settings, you must know the following:• SS

Pagina 20 - Verifying Your Connection

Configuring Your Wireless Network 232. Check that the wireless adapter on each computer can support the mode and security option that you selected. (I

Pagina 21 - Figure 12

24 Configuring Your Wireless Networkthe WPS-capable client. (For more information on setting up a mixed network, see the on-line Reference Manual. A l

Pagina 22 - Figure 13

Configuring Your Wireless Network 25– Select the Push Button radio box and either press the WPS push button on the side panel of the router or click t

Pagina 23

iiiContentsWireless-N ADSL2+ Modem Router DGN2000 Setup ManualGetting to Know Your Wireless Router...

Pagina 24

26 Configuring Your Wireless Network• If a connection is established, the router WPS screen displays a message confirming that the wireless client was

Pagina 25 - Specifying Wireless Settings

Configuring Your Wireless Network 275. Leave the Wireless mode at the default setting of 130 Mbps. This mode is backward compatible with 802.11b and 8

Pagina 26

28 Configuring Your Wireless Network

Pagina 27

Troubleshooting 29TroubleshootingThis chapter gives information about troubleshooting your wireless-N modem router. After each problem description, in

Pagina 28 - Figure 14

30 TroubleshootingIf a port’s LED is lit, a link has been established to the connected device. If a LAN port is connected to a 100 Mbps device, verify

Pagina 29 - Figure 16

Troubleshooting 31• Make sure that power is turned on to the connected hub or workstation.• Be sure you are using the correct cable: when connecting t

Pagina 30

32 Troubleshooting• Click the Refresh or Reload button in the Web browser. The changes may have occurred, but the Web browser may be caching the old c

Pagina 31

Troubleshooting 33If disconnecting telephones does not result in a green ADSL Internet LED the problem may be one of the following:• Check that the te

Pagina 32

34 TroubleshootingTroubleshooting PPPoE or PPPoAThe PPPoE or PPPoA connection can be debugged as follows:1. Access the main menu of the router at http

Pagina 33 - Troubleshooting

Troubleshooting 35Troubleshooting a TCP/IP Network Using the Ping UtilityMost TCP/IP terminal devices and routers contain a ping utility that sends an

Pagina 34 - Power LED is Red

ivTroubleshooting...29Basic Functioni

Pagina 35 - Troubleshooting 31

36 Troubleshooting– Verify that the IP address for your router and your workstation are correct and that the addresses are on the same subnet.Testing

Pagina 36 - ADSL link

Troubleshooting 37Using the Wireless On/Off and WPS Buttons to Reset the RouterTo restore the factory default configuration settings without knowing t

Pagina 38 - 3. Click Connection Status

Technical Specifications 39Technical SpecificationsThis appendix provides technical specifications for the wireless-N modem router.General Specificati

Pagina 39 - 3. Click OK

40 Technical SpecificationsDefault ConfigurationYou can use the Wireless On/Off and WPS buttons that are located on the side of your router to reset a

Pagina 40 - 36 Troubleshooting

Technical Specifications 41Time Zone Adjusted for Daylight Saving TimeDisabledSNMP DisabledFirewallInbound (communications coming in from the Internet

Pagina 41 - Troubleshooting 37

42 Technical Specifications

Pagina 42 - 38 Troubleshooting

Related Documents 43Related DocumentsThis appendix provides links to reference documents you can use to gain a more complete understanding of the tech

Pagina 44 - Default Configuration

45Registration and CertificationsProduct Registration, Support, and Documentation Register your product at http://www.NETGEAR.com/register. You must r

Pagina 45

Getting to Know Your Wireless Router 1Getting to Know Your Wireless RouterCongratulations on your purchase of a NETGEAR® high-speed wireless router, t

Pagina 47 - Related Documents

2 Getting to Know Your Wireless RouterHardware FeaturesBefore you install and connect your router, take a moment to become familiar with the front and

Pagina 48 - 44 Related Documents

Getting to Know Your Wireless Router 3LAN Port 1 Solid GreenBlinking GreenSolid AmberBlinking AmberOffThe Local port has detected a link with a 100 Mb

Pagina 49 - . When the

4 Getting to Know Your Wireless RouterRouter Back PanelThe back panel of the wireless-N modem router contains port connections.Viewed from left to rig

Pagina 50

Getting to Know Your Wireless Router 5Router Side PanelThe side panel of the router has a Wireless On/Off button and a WPS button.The side panel conta

Comentarios a estos manuales

Sin comentarios