Netgear ME103 Manual de usuario descargar pdf (Pagina 40)

Reference Manual for the ME103 802.11b ProSafe Wireless Access Point

3-19 Basic Installation and Configuration

August 2003

• The IP Address Source

The wireless access point is shipped preconfigured to use a private IP address on the LAN

side, and to act as a DHCP client. If the wireless access point does not find a DHCP server on

the Ethernet LAN, it defaults to this IP configuration:

– IP Address— 192.168.0.224

– IP Subnet Mask— 255.255.255.0

– Gateway — 0.0.0.0

– Primary DNS — blank

– Secondary DNS — blank

If your network has a requirement to use a different IP addressing scheme, you can make those

changes in this menu. These settings are only required if the “Use this IP address” radio button

is chosen. Remember to click Apply to save your changes.

• Access Point Name (NetBIOS)

Enter a new name for the wireless access point and click Apply to save your changes.

• Enable EWINS

This allows your wirelessly connected PCs to browse the remote network using the Windows

Network Neighborhood feature. Select this check box, enter the WINS Server name or IP

address, and click Apply to save your changes.

• SNMP Management

This allows your take advantage of the management features supported in the ME103 MIBs.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 117 118

Sin comentarios

Netgear ME103 Manual de usuario Pagina 40