Netgear PTVU1000 Guía de instalación

Universal Push2TV HD Adapter PTVU1000 Installation Guide

102. What settings should I choose if I’m a Vista or Windows 7 user?NETGEAR recommends that you use the AERO Desktop Theme for better video performan

114. What if there is no audio coming from my remote stereo speakers?When connecting for the first time, or if your PC goes into power save mode, you

12• When viewing streaming video from the Internet, especially in Full Screen Mode, NETGEAR recommends that you optimize the signal by disabling t

138. What are the system requirements for 720p/1080p playback?For 720p playback, you need a 1.8 GHz Core Duo processor or better. For 1080p playback

14Make the following changes in the Screen Resolution window:a. In the Resolution field, make a selection from the drop-down menu to change the resolu

ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmf

NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134 USAJuly 2011

© 2011 NETGEAR, Inc. All rights reserved.No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or t

3What’s in the Package

4Getting Started1. Connect the TV Adapter to the HD base.For table top positioning:a. Slide the shutter to show the top USB port.b. Attach the TV Ad

54. Make sure your TV is on and set to display the correct video input.5. Connect to your TV using an HDMI cable.The Push2TV unit boots up for about

6Software Installation1. On your PC, log in as Administrator, and insert the CD. The Universal Push2TV Software Setup installation window displays..N

7Starting the Connection1. Connect the PC Adapter to a USB port on your PC. Be sure to keep the PC Adapter in an upright position only.2. After you

8PositioningFor best performance, keep the PC Adapter and the TV Adapter at a maximum distance of 20 feet (approximately 6 meters) from each other, an

9FAQs1. What if there is no sound?Go to Control Panel > Sound, and you can adjust the sound in one of the following ways:If using S/PDIF or HDMI (